HI 9146 is a water-resistant, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC).D.O. measurements in parts per million (ppm=mg/L) or in % of saturation. The temperature range is indicated in Celsius from 0 to 50°C with 0.1 resolution (also allows manual compensation of altitude and salinity). A polarographic probe is provided with a protective cover for the membrane. HOLD to freeze the reading on the LCD.
HI 9146 Portable Dissolved Oxygen Meter
| Specifications | HI 9146 |
| Range O2 | 0.00 to 45.00 mg/L (ppm) |
| % saturation O2 | 0.0 to 300.0% |
| Temperature | 0.0 to 50.0ºC |
| DO Calibration | 1 or 2 points 0% & 100% |
| Tº Compensation | Automatic |
| Altitude Compensation | 0 to 4000m |
| Salinity Compensation | 0 to 80 g/L (ppt) |
| Probe | Polarographic with Tº Sensor |
| Dimensions | 185x72x36mm |
| Weight | 300g |
HI 9146-04 is supplied complete with HI 76407/4F probe with 4 m (13′) cable and protective cap, 2 spare membranes, HI 7041S electrolyte solution (30 mL), batteries, hard carrying case and instructions.HI 9146-10 is supplied complete with HI 76407/10F probe with 10 m (33′) cable and protective cap, 2 spare membranes, HI 7041S electrolyte solution (30 mL), batteries, hard carrying case and instructions.
The HI 9146 DO Meter utilizes a polarographic sensor: the probe is composed of a platinum electrode and a silver electrode. A concentrated potassium chloride (KCl) solution is held in place over the surface of the electrodes by a PTFE membrane. An external voltage creates a difference in potential between the cathode and the anode (less than 0.5V).
The external voltage applied to the platinum electrode (cathode), silver electrode (anode), KCl solution and gas-permeable membrane material establishes a current that is proportional with the concentration of oxygen.
DO range up to 300%
Altitude and Salinity compensation
Automatic calibration in air
Related products
Water Testing Instruments
Digital Refractometers
$1For quick and accurate measurement of sugar, sodium chloride, specific gravity and freezing point.
Water Testing Instruments
Edge™ Smart Bench-Top pH/EC/DO Meter
$1Microprocessor based laboratory instrument with large 5.5’’ LCD display, for pH, Electric Conductivity and Dissolved Oxygen measurements.
Water Testing Instruments
Karl Fischer Automatic Titrators
$1For automatic water content (moisture) determination with volumetric method (range 100ppm to 100%) or coulometric method (1 ppm to 5%).
Water Testing Instruments
Field Multiparameter Meters with GPS
$1pH/ORP/ISE, EC/TDS/Resistivity/Salinity/Seawater Specific Gravity, Turbidity, DO, Temperature and Atmospheric Pressure
Water Testing Instruments
Portable Turbidity Meter
$1Tungsten light source, EPA compliant turbidity measurement. Provides you a simple yet accurate way to test turbidity on-site.
Water Testing Instruments
Waterproof Portable pH/ORP/EC/ISE Meters
$1Portable Instruments for pH, ORP, Electrical Conductivity and Ion Specific Analysis
Water Testing Instruments
Automatic Titration System
$1For direct or back titrations, 4 working modes: potentiometric, pH-meter, mV-meter and ISE-meter. Can be equipped with an autosampler.