The Disc Pulverizer Pulverisette 13 is designed for batch or continuous fine grinding of brittle and very hard materials. The maximum feed particle size is approx. 20 mm edge length. The fineness attainable (d50) is down to approx. 12 mm (largest gap width) or 0.1 mm (smallest gap width). The maximum throughput of 150 kg/h depends on the gap setting and the hardness of the sample. The relatively large throughput enables it to be used in both pilot scale and small size production, for example: slag-disintegration for the reclamation of precious metals. Applications: mining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research.
Laboratory Disc Pulverizer Pulverisette 13
The Laboratory Disc Pulverizer Pulverisette 13 is designed for batch or continuous fine grinding of hard-brittle to medium-hard solids.
Maximum feed size: | 20 mm (3/4’’) |
Final fineness: | 0.1 to 12 mm (depending on gap setting) |
Maximum capacity: | 150 kg/h |
Grinding materials: | Hardened cast steel, manganese steel, tungsten carbide, zirconium oxide |
Dimensions (WxDxH): | 44x87x40 cm (17x34x16’’) |
Weight: | 140 kg (308 lbs.) |
- Certified safety (CE mark) – optional CSA approval for Canada
- 2-year warranty
- Combinable with the Jaw Crusher PULVERISETTE 1
The material is pulverized by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. The ground material automatically falls down through a pre-set grinding gap into the collection pan. The desired final fineness can be defined from the outside by changing the gap width. The Disc Mill Pulverisette 13 can be combined with the Jaw Crusher Pulverisette 1 for a size reduction from 95 mm down to 150 µm in a single pass.
- Simple operation, fast, easy cleaning
- Precision setting of the final fineness even during grinding
- High service life due to generously dimensioned bearings
- German quality
Related products
Crushers, Pulverizers, Grinders
Laboratory Vibratory Micro Mill Pulverisette 0
$0The Micro Mill Pulverisette 0 is designed for fine grinding of dry laboratory samples or solids in suspension, and for homogenisation of emulsions or pastes.
Crushers, Pulverizers, Grinders
High-Tech Disc Pulverizer Pulverisette 13 Premium
$1The Laboratory Disc Pulverizer Pulverisette 13 Premium Line is designed for batch or continuous fine grinding of hard-brittle to medium-hard solids, down to 50µm.
Crushers, Pulverizers, Grinders
Nano Range Planetary Mill Pulverisette 7 Premium
$0Thanks to the high rotational speed of up to 1100 rpm for the main disc, this high-tech Planetary Mill, Pulverisette 7 Premium, easily grinds down to the nanometer range.
Crushers, Pulverizers, Grinders
Planetary Micro Mill Pulverisette 7
$0The Planetary Micro Mill Pulverisette 7 is designed for uniform, and extremely fine size reduction of very small samples of hard to soft material, dry or in suspension, down to colloidal fineness. Also designed for mixing and homogenising of emulsions or pastes.
Crushers, Pulverizers, Grinders
Laboratory Cutting Mill Pulverisette 15
$0This Laboratory Cutting Mill is recommended for size reduction of dry sample material with soft to medium-hard consistency, for fibrous materials or cellulose materials.
Crushers, Pulverizers, Grinders
High Energy Planetary Ball Mill Pulverisette 5 Premium
$1The High Energy Planetary Ball Mill Pulverisette 5 PREMIUM with 2 working stations is the ideal mill for fast, wet or dry, grinding of larger sample quantities down to the nanometer range, with the highest safety standards.
Crushers, Pulverizers, Grinders
Laboratory Marcy® Gyroll 6-inch & 10-inch Cone Crushers
$1The Gyroll Cone Crushers are recommended mining industry, for intermediate crushing of friable rock, feed of spiral concentration, concentration table or laboratory pulverizer.
Crushers, Pulverizers, Grinders
Marcy® Double Roll Crushers
$1The Marcy Double Roll Crusher meets your requirements for intermediate crushing of friable rock or rock-like materials